ComAp Inteli Mains NTC BaseBox User Manual

Communication Guide, ©ComAp – March 2014 81
IGS-NT Communication Guide 03-2014.pdf
CAUTION!
This device can extend total CAN bus length by 100km between 2 converters (single mode version
only) using optical link, but total length of metalic CAN bus must not exceed these values:
200 m if setpoint Comms setting: CAN bus mode is set to 32C in controllers
900 m if setpoint Comms setting: CAN bus mode is set to 8C in controllers
CAN-Ethernet gateway

ComAp Inteli Mains NTC BaseBox Specifications

General

Brand	ComAp
Model	Inteli Mains NTC BaseBox
Category	Controller
Language	English