ComAp InteliLite MRS16 User Manual

InteliLite Global Guide
573
Alarm Type Warning
Alarmlist message Wrn Generator L3L1 < Voltage
Alarm evaluated Generator excited only
Related applications AMF, MRS
Description
This alarm evaluates the generator phase to phase voltage between phases 3 and
1. The following setpoints are related to it:
Generator < Voltage Wrn (page 199)
Generator <> Voltage Delay (page 200)
Wrn Generator L3L1 < Voltage
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Generator > Frequency
Alarm evaluated Generator excited only
Related applications AMF, MRS
Description
This alarm evaluates the generator frequency in the phase L1. The following
setpoints are related to it:
Generator > Frequency Wrn (page 201)
Generator <> Frequency BOC Delay (page 202)
Wrn Generator > Frequency
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Generator < Frequency
Alarm evaluated Generator excited only
Related applications AMF, MRS
Description
This alarm evaluates the generator frequency in the phase L1. The following
setpoints are related to it:
Generator < Frequency Wrn (page 202)
Generator <> Frequency BOC Delay (page 202)
Wrn Generator < Frequency
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Check DPF Status
Alarm evaluated When ECU is configured
Related applications AMF, MRS
Description
This alarm occurs when ECU send alarm message about Tier IV protection.
Note: Tier IV protection have to be supported by ECU.
Wrn Check DPF Status
6 back to List of alarms level 1

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English