InteliMains 210 Global Guide
116
Second type of monthly repetition is based on repeating days in week in month.
Image 5.42 Monthly mode - InteliConfig
In timer mode select Repeat. In repetition type select Monthly. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Than select the type of monthly
repetition, the x-th week of repetition and days in week. Than select the x-th month of repetition.
Example: On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be again activated every 2nd week in 2nd month on Monday, Wednesday and Friday at 12:00 for 1 hour.
Set-up via controller interface
There are two types of monthly repetition. First of them is based on repeating one day in month.
In controller go to the Scheduler setpoint group. Select the function of timer via Timer 1 Function (page 250)
setpoint. Than go to Timer 1 Setup and press enter button. In Timer 1 Repetition (page 250) setpoint select
Repeated mode. Than adjust Timer 1 First Occur. Date (page 251), Timer 1 First Occur. Time (page 251) and
Timer 1 Duration (page 251). In setpoint Timer 1 Repeated (page 252) select Monthly and adjust type of monthly
repetition via Timer 1 Repeat Day (page 254), Timer 1 Refresh Period (page 253) (x-th month of repetition) and
Timer 1 Repeat Day In Month (page 255) (concrete day in repeated months).
Second type of monthly repetition is based on repeating days in week in month.
In controller go to the Scheduler setpoint group. Select the function of timer via Timer 1 Function (page 250)
setpoint. Than go to Timer 1 Setup and press enter button. In Timer 1 Repetition (page 250) setpoint select
Repeated mode. Than adjust Timer 1 First Occur. Date (page 251), Timer 1 First Occur. Time (page 251) and
Timer 1 Duration (page 251). In setpoint Timer 1 Repeated (page 252) select Monthly and adjust type of monthly
repetition via Timer 1 Repeat Day (page 254), Timer 1 Refresh Period (page 253) (x-th month of repetition), Timer
1 Repeated Day In Week (page 255) (days in week when timer is active) and Timer 1 Repeat Week In Month
(page 255) (concrete week in repeated months).
Note: Use left and right buttons to move between timer setpoints.
To Next Page
Loading...
Need help?
General
