InteliMains 210 Global Guide
128
5.4.19 USB host
USB host is a function for programming of controller from USB Flash Drive. Following functions are supported:
Firmware upload
Configuration upload
Firmware and configuration upload
Configuration download
Image 5.52 USB host flowchart
Terminology:
The Archive = the native file of InteliConfig, including the complete Configuration + History + Statistic +
Values (in the time of download) + Alarm list.
Configuration = the part of Archive, in the terms of Configuration + Setpoints + PLC + IO definitions +
Languages.
New configuration = the configuration created in InteliConfig for the purpose of uploading it into the controller
using the USB memory stick. The new configuration is recognized due to it’s name. The name has to
contain the specific string ="InteliMains210-Genset name-M.N.P.B.aig3".
Compatible firmware = the firmware version compatible with the configuration in the controller. The name of
file including the firmware is "InteliMains210-M.N.P.B.bin".
Abbreviations:
CU - control unit
FW - firmware
CFG - configuration
To Next Page
Loading...
