InteliMains 210 Global Guide
43
5.2.4 Firmware upgrade 49
6 back to Controller setup
This chapter contains brief introduction into the specifics of firmware and archive upload and connection of
various PC tools to the controller. If you require detailed information on each PC tool please use the included
Help in those PC tools or download their Reference Guides.
5.2.1 USB
You may connect to the controller using the USB port. In this case standard USB A to B cable should be used.
Connection using InteliConfig
Image 5.1 First screen of InteliConfig - select connect to controller
Image 5.2 Second screen of InteliConfig - select detected controllers
To Next Page
Loading...
