ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
215
General Analog Input 5
Setpoint group General Analog Inputs Related FW 2.0.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9271 Related applications MCB, MGCB, BTB
Description
Warning or history threshold level for AIN PROT05 (PAGE 468).
Note: These setpoints are used only if LAI AIN PROT05 (PAGE 468) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 5 Wrn
6 back to List of setpoints
Setpoint group General Analog Inputs Related FW 2.0.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9272 Related applications MCB, MGCB, BTB
Description
Shutdown or BOC threshold level for AIN PROT05 (PAGE 468).
Note: These setpoints are used only if LAI AIN PROT05 (PAGE 468) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 5 Sd
6 back to List of setpoints
Setpoint group General Analog Inputs Related FW 2.0.0
Range [units] 0 .. 900 [s]
Default value 0 s Alternative config NO
Step 1 s
Comm object 9273 Related applications MCB, MGCB, BTB
Description
Delay for AIN PROT05 (PAGE 468).
Note: These setpoints are used only if LAI AIN PROT05 (PAGE 468) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 5 Delay
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English