ComAp InteliMains 210 BTB User Manual

InteliMains 210 Global Guide
268
Setpoint group
CM-GPRS; CM-4G-
GPS; CM-Ethernet
Related FW 2.0.0
Range [units] [-]
Default value English Alternative config NO
Step [-]
Comm object 24299 Related applications MCB, MGCB, BTB
Description
Use this setpoint to set the language of SMS and e-mail.
Note: Numbers correspond with languages in language list. See the chapter for Language selection
(page 72) more information.
This setpoint is common for CM-Ethernet, CM-GPRS and CM-4G-GPS modules.
Message Language
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24313 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the username for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP User Name
6 back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 2.0.0
Range [units] 0..15 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24312 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the password for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP User Password
6 back to List of setpoints

ComAp InteliMains 210 BTB Specifications

General

Brand	ComAp
Model	InteliMains 210 BTB
Category	Controller
Language	English