InteliMains 210 Global Guide
288
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24370 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the username for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP UserName
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] 0..15 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24369 Related applications MCB, MGCB, BTB
Description
Use this setpoint to enter the password for the SMTP server. Leave the setpoint blank if the SMTP server
does not require authentication.
SMTP User Password
6 back to List of setpoints
Setpoint group CM-Ethernet Related FW 2.0.0
Range [units] 0..31 characters [-]
Default value airgate.comap.cz:9925 Alternative config NO
Step [-]
Comm object 24368 Related applications MCB, MGCB, BTB
Description
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) or number of port (with colon like a first mark) of the SMTP server. Ask your internet provider
or IT manager for this information.
Note: You may use also any public SMTP server which does not require connection over SSL/TLS
channels. If the device is connected to AirGate the AirGate SMTP server at "airgate.comap.cz" may be
used. Ports 25 and 9925 are supported. After controller connects to AirGate for the first time (or with new
public IP address), it may not be able to send emails for first 5-10 minutes.
SMTP Server Address
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
