ComAp InteliVision 5 - How to Change a Gen-Set Mode

How to Change a Gen-set Mode?
To Change a Gen-set Mode:
1. Press Mode context button (See the picture).
2. Use ↑ or ↓ to choose menu item and press Enter
How to Find Alarms?
To find alarms:
1. Press Menu button
2. Use ↑ or ↓ to choose menu item AlarmList and press Enter.
3. Or use context button AlarmList to jump directly to Alarm list.
Hint:
In the first measurement screen controller will jump to the alarm list immediately when any alarms
occurs.
InteliVision 5-1.1 Reference Guide ©ComAp – December 2011 13