ComAp InteliVision 5 Reference Guide

AlarmList Screen
On AlarmList screen you can see and work with alarms. When an error occurs, a new alarm appears
in the AlarmList screen, exclamation mark starts blinking on the measurement screens. A small alarm
icon is placed also to heading to be visible in all screens of IV5 including newly generated screens
from Screen editor or by adding new modules in configuration. See figure below.
alarm indication
alarm indication
alarm indication
There are 2 levels of alarms:
First level alarms - is displayed by YELLOW colour
Second level alarms -
is displayed by RED colour
Hint
:
When a new alarm appears AlarmList screen is displayed automatically when Main Measurement
screen is displayed. From different screen, AlarmList button has to be used to display AlarmList
screen.
Where to Find Alarms:
1. To go to AlarmList screen, press AlarmList context button or Menu button and choose AlarmList.
Sum of all alarms
Sum of unacknowledged active and inactive alarms
Number of active alarms
InteliVision 5-1.1 Reference Guide ©ComAp – December 2011 28

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English