ComAp InteliVision 5 Reference Guide

Communication
To see information on how to connect InteliVision 5 display to a controller, go to
How to Connect IV5 display to IGS-NT?
sub-chapter.
Controller info
To see information about the control unit see Controller info page. See the picture below:
Modules info
Modules info is the screen where all connected modules can be seen, e.g. I-LB+, IGS-NT-E-COM and
etc.
InteliVision 5-1.1 Reference Guide ©ComAp – December 2011 32

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English