How to Log in?
To enter a controller user:
1. Press Menu button.
2. Use ↑ or ↓ to choose Help/Others and press Enter
3. Use ↑ or ↓ to choose Users/Password menu item
4. Use ↑ or ↓ to go to Users field and press Enter.
5. Use ↑ or ↓ to set the correct user and press Enter. See the picture below:
Hint
The controller is unlocked only when proper password is inserted.
When user is log in. Green lock is displayed in the right upper corner and appropriate access level is
indicated. See figure below.
How to Enter a Password?
To enter a controller password:
1. Press Menu button.
2. Use ↑ or ↓ to choose Help/Others and press Enter
3. Use ↑ or ↓ to choose Users/Password menu item
InteliVision 5-1.1 Reference Guide ©ComAp – December 2011 10
To Next Page
Loading...
Need help?
General
