ComAp InteliVision 5 Reference Guide

Hint:
If you set the value out of limit, the field will get red colour and the new value is invalid. Invalid value
cannot be confirmed.
String Selection
1. Press the button when the proper setpoints group is chosen (e.g. ProcessControl)
2. Use arrows ↑ or ↓ to go to a certain set-point (e.g. Load ctrl PtM) and press Enter button, see
picture below:
Order of the setpoints group
Sum of the setpoints group
Actual value
3. Use ↑ or ↓ buttons to select the string from the list and press the Enter button.
String Edit
1. Press the button when the proper setpoints group is chosen (e.g. Comms settings)
2. Use arrows ↑ or ↓ to go to a certain set-point (e.g. Gen-set name) and press Enter button, see
picture below:
Actual position in characters list
3. Use ↑ or ↓ buttons to select the character and → ← buttons for the next position and press Enter
button.
InteliVision 5-1.1 Reference Guide ©ComAp – December 2011 25

ComAp InteliVision 5 Specifications

General

Brand	ComAp
Model	InteliVision 5
Category	Monitor
Language	English