If the message
?VERIFY
ERROR
is
displayed. it means that the program may
not have been correctly recorded ante the tape. Rewind the tape and try the
VERIFY
again. If the error persists. rewind the tape back to the beginning of the
save point. save the program again. and verify the program. If the error still per-
sists. try using another portion of the tape or another tape. To find the problem
you may use the Status Word function
(ST).
ST
tells you where the error occurred
(see
ST
function).
The
VERIFY
command can
be
used in program mode. but this
is
not a com-
mon practice.
Examples:
122
VERIFY
VERIFY
"CLIP"
A$="CLlP"
VERIFY
A$
Verify the next program found on the
ape.
Search for the program named
CLIP
on
the tape cassette. and verify
it.
Sa
me
as
above.
To Next Page
Loading...
