CommScope ICX7400-4X10GF - Serial Port Specifications (Pinout RJ-45); Serial Port Specifications (Protocol); Memory Specifications; Regulatory Compliance (EMC)

82 Ruckus ICX 7450 Switch Hardware Installation Guide
Part Number: 53-1003899-09
Ruckus ICX 7450 Specifications
Serial port specifications (pinout RJ-45)
Serial port specifications (pinout RJ-45)
Serial port specifications (protocol)
Memory specifications
Regulatory compliance (EMC)
• FCC Part 15, Subpart B (Class A)
• EN 55022 (CE mark) (Class A)
• EN 55024 (CE mark) (Immunity) for Information Technology Equipment
• ICES-003 (Canada) (Class A)
4 Reserved Not used
5GND Ground
Pin Signal Description
1 Not supported N/A
2 Not supported N/A
3 UART1_TXD Transmit data to ICX
4 GND Logic ground
5 Not supported N/A
6UART1_RXDReceive data from ICX
7 Not supported N/A
8 Not supported N/A
Parameter Value
Baud 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
Memory Type Size
Main memory DDR3 2 GB
Boot Flash NOR Flash 8 MB
Compact Flash eUSB NAND flash 2 GB
eUSB Drive USB 2 GB
Pin Signal Description