Commtest Instruments vb Series User Manual

Section 6: Using Routes
97
Erasing an Entire Route
Warning: The following procedure erases all route entries. Erasing a
route does not erase the machines that make up the route entries.
• From the Main Menu press
to display the Select Route
Menu.
• Press
or to highlight the route to be erased and
press
. You will be prompted to confirm.
• Press + to erase the route.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Commtest Instruments vb Series Specifications

General

Brand	Commtest Instruments
Model	vb Series
Category	Measuring Instruments
Language	English

Summary

Section 2: Basic Operation

Mounting Sensors

Provides instructions on correctly attaching accelerometers and other sensors for accurate measurements.

Tachometer Setup

Section 3: Onsite Analysis - Measurement Menu

Walk-through: Taking Measurements

A step-by-step guide on performing onsite measurements using the instrument's Measure Mode.

Fault Types and Phase Relationships

Section 4: Manual Setup Measurement Parameters

Setting Measurement Parameters

Guides users through manually configuring all parameters for taking measurements.

Setting Spectrum Parameters

Setting Waveform Parameters

Section 5: Recording Data

Walk-through: Taking Recordings

Section 6: Using Routes

Walk-through: Taking Recordings Using a Route

Section 8: Creating Machines

Section 9: Balancing Rotors

The Balancing Process

Outlines the sequential steps involved in performing a rotor balancing procedure.

Trial Readings (Single/Dual Plane)

Covers taking initial and trial weight readings to determine imbalance.

Balance Weight Calculations

Introduces tools for calculating appropriate balance weights.

Section 10: Balancing Walk-through

Trial Weight Reading

Details the process of attaching and measuring the effect of a trial weight.

Trim Balance

Covers performing final adjustments to achieve the desired balance level.

Section 12: Troubleshooting

Resetting the Instrument

Steps for resetting a non-responsive instrument.

Power Problems