Section 1: Introduction
6
Precautions
Please read and understand this section before operating your
instrument. Heed all warnings and recommendations to prevent data
loss, data inaccuracy, damage to the instrument, or injury to yourself.
Do not attach sensors to any object with a high
potential voltage i.e. a voltage that exceeds 50 V DC or
32 V AC or the ‘safety extra low voltage’ (SELV)
defined by your local power authority.
Ensure the cables and bootstrap cannot become
entangled with any rotating or moving machinery.
Do not bring any objects sensitive to magnetic fields
(e.g. cardiac pacemakers, credit cards, floppy disks,
video tapes, audio cassette tapes, mechanical
watches) near the magnetic mounting bases.
Do not operate the instrument in an explosive
environment.
Charge the battery pack up to at least 30% capacity
before taking a recording. If using the instrument for 4
hours or more, first ensure that the battery pack is fully
charged.
Constantly charging the battery when it is not fully
drained will create a 'Memory' effect and eventually
shorten the amount of charge that the battery can hold.
Do not detach the battery pack from the instrument for
more than 2 hours as data and settings may be lost
from the instrument.
Ensure that the battery pack is securely fastened (but
not over-tightened) to the instrument before operating.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
