Section 3: Onsite Analysis - Measurement Menu
37
Using Automated Menus
Advanced operations can be carried out using the automated setups
available from the Measurement Menu. You need only set one or two
parameters yourself and the instrument will automatically apply
default parameters that are optimized for the settings you specify. As
with the quick setup menus, any of the default parameters can be
changed before or during measuring. The default parameters for
each automated setup are listed in Default Parameters (page
52).
• Access the Measurement Menu by pressing
from the
Main Menu.
• To take a measurement, press the number key that
corresponds to the option required.
Instructions for using each of these automated setup menus are
described next.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...