Commtest Instruments vb Series User Manual

Section 3: Onsite Analysis - Measurement Menu
53
Default Parameters
When using the automated menus, the following parameters are
automatically applied.
Tach
Display
Time
Synchronous
Averaging
Bump
Test
Coast-
down/
Run-up
Cross
Channel
Phase
Domain Frequency Time Frequency Frequency Frequency
Window Hanning N/A Hanning Hanning Hanning
Spectral
Lines
400 User defined 400 400 400
Fmin 1 Hz N/A 1 Hz 1 Hz 1 Hz
Average
Type
4 X Linear 16 X Linear Peak hold 1 X Linear 1 X Linear
Amplitude
Scale
Linear N/A Linear Linear Linear
Trigger Tach
Free run
Tach
Free run
Internal
Free run
Internal
Free run
Tach
Free run
Display
Orders
OFF OFF OFF OFF OFF
Harmonic
Cursor
OFF OFF OFF OFF OFF
Tach
Display
ON OFF OFF OFF ON
Autorepeat OFF OFF OFF ON OFF
As with any measurement, the parameters can be changed before
and during measuring as described in Setting Measurement
Parameters (page
63).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Commtest Instruments vb Series Specifications

General

Brand	Commtest Instruments
Model	vb Series
Category	Measuring Instruments
Language	English