Section 5: Recording Data
86
• If you are shown this Prepare for Receive window, select the
folder you wish to transfer and click OK.
• To transfer more than one folder at a time click the 'Receive
multiple folders' box then tick the box beside each folder that
you want to receive.
Tagging Items
Not all machines or points need to have recordings taken during
every recording session. In such cases you can create a sub-list by
tagging only the items for which recordings need to be taken. Tags
are also helpful in that they remind the person taking recordings
which items have not yet been measured.
Tagging an item automatically tags all of its sub-elements e.g.
tagging a point automatically tags all of its axes and parameter sets.
Such an item is marked with a
. If you selectively tag only some of
the elements of an item, the item is marked with a
. When a
recording is taken the tag will disappear.
• To tag an item, from the Main Menu press
then press
till you have the correct menu displayed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
