Compal NBLB2 - Pointing Device; Control Buttons

NBLB2 Service Manual
4
Pointing Device
 Touchpad with up/down scroll zone and two buttons
Flash card reader
 3-in-1 Card Reader (SD, MMC, MS), don‟t support XD card
I/O Ports
 USB 2.0 x 4, Power USB x 4, HDMIx1
 RGB: VGA port x 1
 Microphone-in x 1, Headphone-out × 1, CIR, DC-in jack
 Kensington lock x 1
 3-in-1 Flash Card Reader (SD/MMC/MS) x 1
 Internal microphone x 2
 TV Tuner RF Antenna (Option)
Camera
 2.0M Pixel CMOS Camera w/ USB2.0 interface
TV tuner
 Analog/Digital TV in Mini Card (option)
 Remote controller
System Status Indicators
 2 K/B indicators: Caps Lock, and Num Lock
 1 Power Button LED
 1 LED for IDE HDD activity
 1 LED for System status (Power On / Suspend) (Blue)
 1 LED for Battery status (Charging / Full / L1 / L2)
 1 LED for Blue tooth/Wireless Card
 1 LED for TP Button Disable (Blue/Enabled)
 1 LED for Power USB (Blue)
 1 LED for WoW Audio (Blue)
 1 LED for WoW Video (Blue)
 1 LED for Smart Key (Blue)
Control buttons
 Power button (support software off, 4 sec) x 1
 Magnetic lid switch control for system standby/wakeup
 One Switch to On/Off Wireless Device for wireless control
 Control buttons for Power USB (Workable in system off mode)
 Touchpad Disable Button / Touch Pad Button
User keys
 1x button for Program DJ to Launch AP