Compal NBLB2 - System Setup

NBLB2 Service Manual
18
10. System Setup
10.1 Invoking setup
The setup function can be invoked by pressing F2 when “Press <F2> to enter
Setup” message is prompted on the bottom of screen during POST.
During setup, all Fn function keys and power saving functions are disabled.
10.2 Setup screens
10.2.1 Main Menu
InsydeH20 Setup Utility
Main Security Boot Exit
System Time
[12:00:00]
Details see the following
Help Information
System Date
[01/01/2009]
Processor Type
Type,XXXGHZ
Total Memory
XXX MB
Quiet Boot
[Enabled]
System
BIOS Version:
X.XX.XX
EC FW Version:
V.XX.XX
Serial Number:
XXXXXXXXX
UUID:
XXXXXXXXX
F1 Help
 Select Item
F5/F6 Change Values
F9 Setup Defaults
Esc Exit
Select Screen
EnterSelect SubMenu
F10 Save and Exit
System Time and System Date
The hour is displayed with 24-hour format. The values set in these two fields take
effect immediately.
Processor Type
This field shows CPU type and speed.
Total Memory
This field reports the memory size of the extended memory with an integer in the
system.
Quiet Boot
Allows InsydeH2O to disable or enables booting in Text Mode.
Help information
System Time
[hh:mm:ss]This is the help for the hour field. Vaild range is from 0 to 23.