To determine if the computer‟s HDMI port is functioning properly, perform the
following procedures. Figure 6-7 outlines the process. Start with Procedure 1 and
continue as instructed.
Procedure 1: HDMI connection check
Procedure 2: HDMI set check
8.1 Procedure 1 HDMI connection check
The HDMI cable may be damaged or the connections may be loose. Perform Check
1:
Check 1
Make sure HDMI cable is firmly plugged into both the HDMI set and the HDMI port of
the computer.
If the cable is connected correctly, go to Check 2.
Check 2
Make sure the HDMI port is firmly secured to the system board of the computer.
If the malfunction remains, go to Check 3.
Check 3
The HDMI cable may be damaged. Replace with a good cable.
If the malfunction remains, go to Procedure 2
8.2 Procedure 2 HDMI set check
The HDMI set may be faulty. Perform Check 1
Check 1
Try using the set for HDMI reception.
If it does not work, the set may be damaged.
If the set does work, perform Check 2.
Check 2
Try connecting a different HDMI to the computer.
If the replacement television works, the original set may be damaged.
If the replacement set does not work the system board may be damaged.
To Next Page
Loading...
