Compal NBLB2 - Page 26

NBLB2 Service Manual
20
TPM Status
Show the TPM status: “Enable and Active” or “Disable and Deactive”
TPM Operation
Enable/Disable TPM Function. This option will automatically return to No-Operation.
TPM Force Clear
This item will show when the TPM Operation be set “Enable and Active”, used to
enable /disable TPM Force Clear function.
Supervisor Password
Show the Password status: Clear or Set
Set Supervisor/ HDD Password
Install or Change the password. (Note: You only can set the User password after
the Supervisor password is set.)
Power on Password
Enable or disable the Power on Password. You only can enable/disable Power on
password after the Supervisor password is set.
HDD Password Status
This item will show enable or disable HDD Password Status.
Help information
TPM Operation
Enable/Disable TPM Function. This option will automatically return to No-Operation.
TPM Force Clear
TPM Force Clear Function
Set Supervisor Password
Install or change the password and the length of password must be greater than one
word.
Power on password
Enable: System will ask input password on post time. Disable: System will ask input
pass-
Word when go to Setup Utility
Set hdd Password
Lock Harddisk and the length of password must be greater than one word.