2-2 Compaq 1000 Series UPS Operation and Reference Guide
Installation Requirements
This section lists items needed to install the Compaq 1000 Series UPS models.
Item(s) not supplied with the UPS kit
Tools
A medium flat-bladed and Phillips screwdriver may be needed.
Other Hardware
For rack-mountable models, screws, cage nuts, and a cage nut-fitting tool
(supplied with the rack) are required.
Item(s) supplied with the UPS kit
The UPS kit should contain the following components:
Software/Reference Material
■ The Power Products Documentation CD containing the 1000 Series UPS
Operation and Reference Guide and the Compaq Power Products
Software Reference Guide
■ The Compaq Power Management Software Installation Instructions (a
booklet included with the CD) containing information on the installation
requirements for Compaq Power Management Software
■ Important Safety Information to be reviewed before installing this product
To Next Page
Loading...