Configuration 4-5
Table 4-1
Configuration Parameters/LED Indicators
continued
Parameter
(LED)
Parameter
Name
LED 16
Status
Explanation
8 AC Input Failure On
(default)
Enables an audio alarm when the utility
voltage is outside the UPS operating range.
Off Disables the audio alarm for this event.
9 Sleep Mode On Enables Sleep mode.
Off
(default)
Disables Sleep mode.
11-14 Reserved Reserved for future use.
15 Reset Defaults On Defaults are restored
2
.
Off Configuration selected by the user
overrides defaults.
Notes:
1
Only one nominal utility voltage can be configured.
2
If model T1500j voltage defaults to 120, change the voltage to 100.
To Next Page
Loading...
Need help?
General
