Reference Guide 7-27
Writer: Your Name Saved By: Alyce Klingler-Castle Saved Date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
3. Install the guide screw into the front screw hole on the
right-hand side of the drive.
✎
Some options use M3 metric thread hardware. Extra guide
screws are provided on the front of the chassis, under the
front bezel. The Compaq-supplied metric screws are
black.
4. Install the drive in the desired drive bay and secure the
drive with two screws through the side of the drive cage.
✎
Be sure the guide screw lines up with the guide slot in the
drive cage.
Aligning the Guide Screw and Installing an Optional Drive
To Next Page
Loading...
