7-28 Upgrading the Minitower Computer
Writer: Your Name Saved by: Alyce Klingler-Castle Saved date: 06/13/97 5:49 PM
Pages: 36 Words: 4809 Template: c:\msoffice\templates\comm.dot
File Name Ch7.doc Part Number 270844-001
5. Connect the drive power 1 and 2 signal cables and, if it is
a CD-ROM drive or PD-CD Drive, connect the audio 3
connector. The other end of the audio cable 3 should be
connected to P4 on the system board.
Connecting the Drive Cables
Connecting the Audio Cable to P4 on the Pentium-Based System Board
To Next Page
Loading...
