2-14 Understanding and Using Intelligent Manageability
Writer: Debbie Thomson Saved by: Debbie Thomson Saved date: 06/30/97 2:01 PM
Pages: 36 Words: 7459 Template: c:\msoffice\templates\comm.dot
File Name Ch2.doc Part Number 270844-002
2. Turn off the computer and disconnect the power cord from
the electrical outlet.
!
WARNING:
To reduce the risk of personal injury from electrical
shock and/or hot surfaces, be sure to disconnect the power cord
from the wall outlet, and allow the internal system components to
cool before touching.
✎
Refer to Chapter 6 or Chapter 7 for computer disassembly
and reassembly instructions.
3. Remove the computer cover or side panel and the
expansion board cage.
4. Remove the jumper at E50 from pins 1-2.
E50 Jumper and Location on Pentium-Based System Board
To Next Page
Loading...
