Reference Guide 2-15
Writer: Debbie Thomson Saved By: Debbie Thomson Saved Date: 06/30/97 2:01 PM
Pages: 36 Words: 7459 Template: c:\msoffice\templates\comm.dot
File Name Ch2.doc Part Number 270844-002
E50 Jumper and Location on Pentium II Based System Board
5. Place the jumper on pins 5-6 of E50 for at least one minute.
6. After waiting at least one minute, replace the jumper on
pins 1-2.
7. Reassemble and restart the computer. Your password is
erased from system memory.
✎
When you restart the computer, and the screen displays a
message that says, “system options not set,” you should
verify the system date and time.
8. Establish a new power-on password, if you wish.
To Next Page
Loading...
