Chapter 2 System Overview
Compaq iPAQ Series of Desktop Personal Computers
Second Edition – February 2001
2-2
2.2 FEATURES AND OPTIONS
This section describes the standard features and available options.
2.2.1 STANDARD FEATURES
The following standard features are available on all models:
♦ Celeron or Pentium III processor
♦ Two DIMM sockets for system memory
♦ AC’97 audio subsystem with front panel microphone and headphone jacks
♦ MultiBay w/hot-swap support
♦ Hard drive fault prediction
♦ Two USB ports on front panel
♦ Network interface controller
♦ VGA analog output (1600 x 1200 max resolution)
♦ APM 1.2 power management support
♦ Plug ’n Play compatible (with ESCD support)
♦ Intelligent Manageability support
♦ Energy Star compliant
♦ Security features including:
• Setup and power-on passwords
• DriveLock for MultiBay hard drive
• I/O interface disabling
• Administrator password
• Network service boot
• Asset tracking tag
• UUID
• Cable lock provision
♦ Compaq Easy-Access keyboard w/Windows support
♦ Mouse
♦ 90-watt power supply
Table 2-1 shows the differences in features between the iPAQ 1.0, 1.2, and 2.0 models:
To Next Page
Loading...
