Index-9
Compaq ProLiant 3000 Servers Setup and Installation Guide
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
File Name: K-INDX.DOC Last Saved On: 1/12/99 1:34 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SCSI 1-4
cables 4-20
connector, internal 4-5
controller 1-4
controller cables 4-20
controllers 1-4
drive bays 1-4, 4-1
drive cage removal 4-14
drive configurations 1-10
drives 4-14
drives, hot-plug 4-23
duplex board installation 4-14
ID numbering, illustrated 4-26
ID numbers 4-25
optional controllers 1-4
pass-thru board removal 4-14
storage capacity 1-10
support 1-4
Wide Ultra 1-1
SDRAM 1-1. See also memory
security features 1-8
selector arrow, IMD 6-4
Server Setup and Management Pack
3-9, 5-1
servers
configuration and utilites 5-1
face plate 3-26
health logs 1-6
integrated 512-KB secondary
cache 1-2
loading 3-24
option replacement 4-1
option upgrade 4-1
options 4-1
power 4-1
rack mounting bracket 3-10,
3-11
rack slide rail assembly 3-11
servers
Continued
shutting down 4-2
temperature requirements 2-4
template 3-16, 3-17, 3-18
warnings and precautions 2-1,
2-2
setting
date 5-8
Num Lock state 5-8
time 5-8
SGRAM See memory, video
shutting down power 4-3
simplex enable board 4-14, 4-17,
4-25
installation 4-16
installation, illustrated 4-17
slide rail assembly 3-11. See also
rails
slots
expansion 1-2
PCI and ISA 1-2
SmartStart 1-6, 2-6, 5-1, 5-3, 5-4,
5-5, 5-9, 5-10, 5-15, 5-16, 5-17,
5-18, 5-19, 6-7, 6-8
CD 5-1
creating system partition 5-9
device drivers
for Banyan VINES 5-19
for IBM OS/2 5-18
for Novell NetWare 5-15
for SCO 5-17
for Windows NT 5-16
starting from System
Configuration Utility 2-6
SmartStart and Support Software CD
5-1, 5-3, 5-4, 5-9, 5-10, 5-15,
5-16, 5-17, 5-18, 5-19
SMP 5-14
SMP operating system support 5-14
To Next Page
Loading...
