DeviceMaster LT User Guide: 2000586 Rev. B
Socket Port Configuration - 43
Accessing Socket Configuration
Accessing Socket Configuration
There are several ways to access the socket configuration pages (either version,
SocketServer or NS-Link). Use the method that fits your environment best.
• Web Browser
• PortVision DX
Web Browser To access the socket configuration page for the DeviceMaster
LT using a web
browser, follow this procedure.
1. Start your web browser.
2. Enter the IP address of the Device
Master LT in the URL field.
Note: If you do not know the
IP address, you can view the IP address in
PortVision DX.
3. Click the port number that you want to configure socket port settings (serial,
TCP conn
ection configuration, and UDP connection configuration).
Note: S
ee the web page Help system, if you need information about configuring
sockets or serial tunneling. The Help system provides detailed configuration
procedures and descriptions for all fields. See
Web Page Help System on
Page 41 for information about downloading the help file separately.
4. Click Sa
ve to return to the Server Status page.
5. Optionally, access the following pages to configure additional settings:
a. Click the Netw
ork tab to change the network settings.
b. Click the Security ta
b to enable DeviceMaster LT security.
c. Click the Email ta
b to configure email notification services.
d. Click the RFC1
006 tab to configure RFC1006 settings.
PortVision DX There are several ways to access the socket configuration (NS-Link or
Soc
ketServer) page for the DeviceMaster LT using PortVision DX.
1. If necessary, start PortVision DX, right-c
lick the DeviceMaster LT that you
w
ant to configure, and click Webpage.
2. Click the port for which you want to configure socket port settings (serial,
TCP
connection configuration, and UDP connection configuration).
Note: For socket configuration information see
the Help system. Click the ? in
a configuration area for field specific information or the Help button at
the bottom of the page to view page level help. To locate configuration
procedures, scroll to the top of the Help file and view the Table of
Contents.
3. Click Sa
ve to return to the Server Status (main) page.
4. Optionally, access the following pages to configure additional settings.
e. Click the Netw
ork tab to change the network settings.
f. Click the Security tab to
enable DeviceMaster LT security.
g. Click the Email ta
b to configure email notification services.
h. Click the RFC1
006 tab to configure RFC1006 (ISO over TCP) settings.
To Next Page
Loading...
