Comtrol DeviceMaster LT - Accessing Redboot Commands in Telnet;Ssh Sessions (Portvision DX)

94 - Managing the DeviceMaster LT
DeviceMaster LT User Guide: 2000586 Rev. B
Accessing RedBoot Commands in Telnet/SSH Sessions (PortVision DX)
Accessing RedBoot Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX to access RedBoot
commands.
Use the following procedure to access a telnet or SSH session with PortVision DX.
1. In PortVision DX, PortVision DX, rig
ht-click the DeviceMaster LT in the
Device List pane for which you want to open a telnet session, and click Telnet/
SSH Session.
2. Select Te
lnet or SSH, leave the Selected Port number, and click Ok.