Comtrol DeviceMaster LT - Accessing Socketserver Commands in Telnet;Ssh Sessions (Portvision DX); Telnet Session

90 - Managing the DeviceMaster LT
DeviceMaster LT User Guide: 2000586 Rev. B
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX. Use the appropriate
procedure for your site:
•
Telnet Session (below)
•
SSH Session on Page 92
Telnet Session Use the following procedure to access a te
lnet session with PortVision DX.
1. In PortVision DX, PortVision DX, rig
ht-click the DeviceMaster LT in the
Device List pane for which you want to open a telnet session, and click Telnet/
SSH Session.
2. Leave the popup set to Te
lnet and Selected Port 23, and click Ok.