DeviceMaster LT User Guide: 2000586 Rev. B
DeviceMaster LT Security - 63
Using a Web Browser to Set Security Features
Using a Web Browser to Set Security Features
The follow procedures are discussed below:
•
Changing Security Configuration
• Changing Keys and Certificates on Page 64
Changing Security
Configuration
Use the following steps to change security settings in
the DeviceMaster LT.
1. Enter the IP address of the DeviceMas
ter LT in the Address field of your web
bro
wser and press the Enter key.
2. Click the Security tab
.
3. Click the appropriate check boxes in the Securit
y Configuration area to enable
or disable security accordingly.
Refer to the help system or
Configure/Enable Security Features Overview on
Page 58 for detailed information.
4. After making changes to the Security Configuration area, click Save.
The Software displays as NS-Link, if you have
installed and configured a device driver.
To Next Page
Loading...
