78 - Managing the DeviceMaster LT
DeviceMaster LT User Guide: 2000586 Rev. B
Loading a SocketServer Configuration File
•Click Load Settings from a File
on the Software Settings
tab of
th
e Properties screen
2. Click Ye
s to the warning that it
will take 25 seconds per device
and
it may also reboot the devices.
3. Browse to the lo
cation of the
conf
iguration file, click the fi
le
na
me (.dc) and then Open.
4. Click the All check
box or click
only
the properties that you wa
nt
to
load for each property page
in
t
he configuration file and th
en
cl
ick Done.
Note: If
you click All, every
selecte
d DeviceMaster LTs
will be programmed with
the same IP address.
5. Close the Load
Configuration
popup message.
To Next Page
Loading...
