DeviceMaster LT User Guide: 2000586 Rev. B
Managing the DeviceMaster LT - 83
Loading Port Configuration
3. In the left pane, highlight the port for which you want to load the port-level
settings from the configuration file.
4. Click Load Conf
iguration.
5. Browse to the location of
the configuration file that you want to load.
6. Highlight the configuration file and click Op
en. The configuration file loads in
a few moments.
7. Make the appropriate choice for your sit
uation:
•Click No to the C
omtrolApplet message, if you are using the file to set up
mu
ltiple DeviceMaster LTs with the same port-level settings.
•Click Ye
s to the ComtrolApplet
message, if you are using the fi
le
to resto
r
e a specific
De
viceMaster LT. For example,
you needed to remove
and then
re-install the DeviceMaster LT
NS-
Link device driver.
To Next Page
Loading...
