Conel FLOW - Page 47

47
7 SETTING UP CONDITIONS 65
7.1 Security 65
7.1.1 Customer-side returns 65
7.2 Listing plan 66
7.3 Setting up conditionsn 66
8 INSTALLATION AND INSTALLATION OF THE CONEL FLOW RAIN-CHAMPION 67
8.1 Security 67
8.2 Wall mounting 67
8.3 Connection of the drinking water pipe 68
8.4 Connection of the suction line 68
8.5 Connection of the pressure line 69
8.6 Connection of the emergency overow 70
8.7 Installation of the immersion pressure probe in the storage tank 70
8.8 Connection of the electrical components of the Conel Flow Rain-Champion 71
8.8.1 Electrical connection of the control unit 71
8.9 Operating modes of the Conel Flow Rain-Champion 72
8.10 Calibration of the level probe 72
8.11 Function Pump switching machine 73
8.11.1 Possible causes of errors at the pump switching machine 73
9 INITIAL COMMISSIONING OF THE CONEL FLOW RAIN-CHAMPION 74
9.1 Security 74
9.2 Execution of the initial commissioning 75
9.2.1 Possible causes of errors during initial commissioning 76
9.3 Vent pump housing: 76
10 OPERATING STATES OF THE CONEL FLOW RAIN-CHAMPION 77
10.1 Security 77
10.2 Normal commissioning 77
10.3 Normal operation 78
10.4 Decommissioning / disassembly 79
10.4.1 Decommissioning 79
10.4.2 Dismantling 79
11 TROUBLESHOOTING 80
11.1 Security 80
11.2 Error state detection 80
11.3 First measures to eliminate faults 80
11.4 Further measures to eliminate faults 80
12 MAINTENANCE 81
12.1 Security 81
12.2 Inspection 81
12.3 Maintenance 82
12.4 Inspection and maintenance measures 82
13 DISPOSAL 85
14 CE COMPLIANCE 86