Control Techniques Digitax ST - Page 122

Menu 9
Parameter
structure
Keypad and
display
Parameter x.00
Parameter
description format
Advanced parameter
descriptions
Serial comms
protocol
Electronic
nameplate
Performance
122 Digitax ST Advanced User Guide
www.controltechniques.com Issue Number: 1
The binary sum output is given by:
Offset + ones input + (2 x twos input) + (4 x fours input)
The value written to the destination parameter is defined as follows:
If destination parameter maximum ≤ (7 + Offset):
Destination parameter = Binary sum output
If destination parameter maximum > (7 + Offset):
Destination parameter = Destination parameter maximum x Binary sum output / (7 + Offset)
9.34 Binary sum offset
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1 2 1111
Range 0 to 248
Default 0
Update rate 4ms x number of menu 9 or 12 functions active write