Control Techniques Digitax ST - Menu 18: Application Menu 1

Parameter
structure
Keypad and
display
Parameter x.00
Parameter
description format
Advanced parameter
descriptions
Serial comms
protocol
Electronic
nameplate
Performance
Menu 18
Digitax ST Advanced User Guide 199
Issue Number: 1 www.controltechniques.com
5.19 Menu 18: Application menu 1
Menu 18 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu can be saved in the drive.
18.01 Application menu 1 power-down saved integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Range -32,768 to 32,767
Default 0
Update rate N/A
18.02 to 18.10 Application menu 1 read-only integer
Coding Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1
Range -32,768 to 32,767
Default 0
Update rate N/A
18.11 to 18.30 Application menu 1 read-write integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
11
Range -32,768 to 32,767
Default 0
Update rate N/A
18.31 to 18.50 Application menu 1 read-write bit
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111
Default 0
Update rate N/A