Control Techniques Digitax ST - Menu 20: Application Menu 3

Parameter
structure
Keypad and
display
Parameter x.00
Parameter
description format
Advanced parameter
descriptions
Serial comms
protocol
Electronic
nameplate
Performance
Menu 20
Digitax ST Advanced User Guide 201
Issue Number: 1 www.controltechniques.com
5.21 Menu 20: Application menu 3
Menu 20 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu cannot be saved in the drive.
*Menu 20 parameters are saved in a difference from defaults type data block if they are not at their default value.
20.01 to 20.20 Application menu 3 read-write integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1* 1
Range -32,768 to 32,767
Default 0
Update rate N/A
20.21 to 20.40 Application menu 3 read-write long integer
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
1* 1
Range
-2
31
to 2
31
-1
Default 0
Update rate N/A