For your safety
Installation manual 22
Installation and preparing for first-time use
When installing the combi steamer and preparing it for first-time use, be aware of the following haz-
ards and take the specified preventive actions:
Hazard Where or in what situations
does the hazard arise?
Preventive action Safety device
Risk from live parts
Under the cover
Under the control panel
Work on the electrical system
must only be performed by
qualified electricians from an
approved customer service
office
Professional working
Disconnect power supply
before removing the cover
Cover
Risk of electric shock if the
water supply is leaking or
cracked.
On the combi steamer
In the entire working area
Use a permanent connection.
Use only suitable pipes that
comply with DIN EN 61770.
None
Risk of explosion from gas Where combi steamer is installed
Work on the gas system must
only be performed by an
approved gas fitter
Professional working
On smelling gas:
Disconnect gas supply at the
shut-off device
Ventilate room
Do not operate any electrical
equipment
Do not create naked flames
Get help
None
Risk of suffocation from
faulty combustion
Where combi steamer is installed
Work on the gas system must
only be performed by an
approved gas fitter
None
Risk of suffocation from
insufficient supply of air for
combustion
Where combi steamer is installed
Work on the gas system must
only be performed by an
approved gas fitter
None
To Next Page
Loading...
Need help?
General
