Convotherm OEB 10.10 Installation Manual

For your safety
Installation manual 27
► Safety devices
Meaning
The combi steamer has a number of safety devices to protect the user from hazards. It is absolutely
essential that all safety devices are fitted and in working order when operating the combi steamer
Position
The following diagrams show the location of the safety devices:
6261 3 4 5
10
OGB 10.10 OEB 10.10 OGB 20.20
Functions
The following table enumerates all the safety devices on the combi steamer, explains their function
and describes the check procedure:
No. Safety device Function Check
1 Cover can only be
removed using tool
 Prevents live parts from being
touched accidentally
 Prevents access to the moving
fan from the wiring compartment
Check that the cover is in place
2 Control panel can only
be removed using a tool
Prevents live parts from being
touched accidentally
Ensure that the control panel is in
place
3
Appliance door:
Protects the operator and outside
environment from hot steam
Check regularly for scratches,
cracks, indentations etc. and
replace door if any are found
4 On-latch position of
appliance door
Prevents scalding of user's face
and hands from escaping steam
Check door positions at low
temperature as described in
Opening the appliance door safely
in the user manual.
5 Suction panel in oven;
can only be removed
using tool
Prevents access to the moving fan
and ensures good heat distribution.
See
Removing and fitting the suction
panel in the user manual for
further details.

Convotherm OEB 10.10 Specifications

General

Model	OEB 10.10
Capacity	10 x 1/1 GN
Power Supply	Electric
Cooking Modes	Convection, Steam, Combination
Voltage	400 V
Frequency	50/60 Hz
Temperature Range	30°C to 300°C