Convotherm OEB 10.10 Installation Manual

Moving and setting up the appliance
Installation manual 36
Conveying the appliance to the installation location
Please observe the following points when conveying the appliance:
 Always move the appliance on a pallet.
 Always move the appliance in an upright position.
 Move the appliance slowly and carefully, and secure it against tipping over.
Avoid moving appliance along uneven routes or up or down steep slopes.
The following diagram illustrates how to move the combi steamer using a forklift truck:
► Unpacking
Checking the tip indicator
Before unpacking the appliance, check the tip indicator on the packaging.
The following table shows the possible tip'n'tell indications:
Indicator Meaning Action
Silver dot:
Appliance has been transported correctly.
Unpack the appliance.
Compare the number on the tip indicator
with the accompanying paperwork.
Red dot:
Appliance has been turned over or
transported on its side.
Check the goods for damage.
Compare the number on the tip indicator
with the accompanying paperwork.
Note down on the accompanying paper-
work the fact that the tip indicator has
actuated and also any damage.

Convotherm OEB 10.10 Specifications

General

Model	OEB 10.10
Capacity	10 x 1/1 GN
Power Supply	Electric
Cooking Modes	Convection, Steam, Combination
Voltage	400 V
Frequency	50/60 Hz
Temperature Range	30°C to 300°C