Moving and setting up the appliance
Installation manual 40
Using lifting straps to take the table-top appliance off the pallet
Risk of injury from lifting incorrectly
When lifting the appliance, the weight of the appliance may lead to injuries, especially in the area of
the torso.
f Use suitable lifting equipment for placing table-top appliances on the work surface or oven stand.
f When shifting the appliance into the correct position, use enough people for the weight of the appli-
ance when lifting it (guide value: 15 to 55 kg max., depending on age and gender). Observe the lo-
cal occupational safety regulations.
f Use the lifting straps (1).
The weight of your appliance is given in the Technical Data on page 87.
Fasten the lifting straps (1) to the appliance feet (2) as shown in the diagram below:
1
1
2
2
Mounting table-top appliance on a work surface
When mounting a table-top appliance on a work surface, follow the steps below:
Ensure the appliance is horizontal by adjusting the height of the appliance feet.
Use a spirit level for this task.
The following diagram shows how to use the spirit level and adjust the appliance feet to ensure the
appliance is horizontal:
To Next Page
Loading...
Need help?
General
