Copley Controls Xenus Plus Series - Page 147

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 147
C.1.5: XE2/XP2/XM2 “-N” and 800-1887 Models
Thermal data for convection-cooling with no heatsink assumes a vertical mounting of the drive on a thermally
conducting surface. The narrow side of the heatplate is in contact with the mounting surface and the large
side of the heatplate is exposed. The heatsink data is taken with heatsink fins running vertically. When fan-
cooling is used vertical mounting is not necessary to guarantee thermal performance of the heatsink.
120 VAC MAINS
240 VAC MAINS
Top view
Vertical mounting
No heatsink
No fan
Top view
Vertical mounting
No Heatsink
With fan
Top view
Vertical mounting
Heatsink
No fan
Top view
Vertical mounting
Heatsink
With fan