Copley Controls Xenus Plus Series - F.4: External Regen Resistor Assemblies; F.5: Edge Filter; F.6: Order Example; F.4: Regen Resistor Assemblies

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 165
F.4: External Regen Resistor Assemblies
Model
Description
XTL-RA-03
Regen Resistor Assembly (for use with XEL/XML/XPL-230-18)
XTL-RA-04
Regen Resistor Assembly (for use with XEL/XML/XPL-230-36, XEL/XML/XPL-230-40
and XE2/XP2/XM2-230-20/800-1818/800-1819/800-1887)
For more information, see Regen Resistor data sheet:
http://www.copleycontrols.com/Motion/Downloads/xenusPlusData.html
F.5: Edge Filter
Model
Description
XTL-FA-01
Xenus Plus Edge Filter
XTL-FA-01 Edge Filter Connector Kit (for all Xenus Plus models)
Model
Qty
Ref
Description
Mfr. Model No.
XTL-FK
1
J1
Plug, 5 position, 5.0 mm, female
Wago: 721-104/026-047
1
J2
Plug, 4 position, 5.0 mm, female
Wago: 721-105/026-047
2
--
Insertion / Extraction Tool
Wago 231-131
Note 1: For RoHS compliance, append “/RN01-0000” to the Wago part numbers listed above
F.6: Order Example
Order 1 XEL-230-18 drive with standard heatsink fitted at the factory, Connector Kit, and serial cable
kit:
1
XEL-230-18-HS
Xenus Plus EtherCAT Servo drive with standard heatsink installed
1
XEL-CK
Connector Kit with solder cup connectors
1
SER-CK
Serial Cable Kit for connecting the PC to the drive
Qty
Item
Description