Copley Controls Xenus Plus Series - Analog Output; Digital Outputs; Analog Outputs

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 70
3.10: Analog Output
XEL/XPL/XML
Channels
1
Type
Single-ended
Range
0-5 Vdc
Resolution
12 Bit
NOTE: There are no analog outputs available on XE2/XP2/XM2/800-1818/800-1819 drives.
3.11: Digital Outputs
XEL/XPL/XML
Channels
6 (OUT1~OUT6)
OUT1~OUT 2
OUT3
OUT4~OUT5
OUT6
Type
Current-sinking, open drain MOSFET with
External flyback diode required if driving
inductive loads
High-speed
5Vdc CMOS
buffer
Opto-isolated
Darlingtons
with 36V
Zener diodes
across
outputs
Opto-isolated motor
brake control,
current-sinking with
flyback diode to
+24V
Maximum
Voltage
+40 Vdc
5Vdc
30Vdc
+32 Vdc
Maximum
Sink Current
1 Adc
±32 mA
20 mA
1 Adc
Low Level
Output
Resistance
< 0.2 
Not
applicable
(Rout only
applies to
MOSFET
outputs)
Not applicable
(Rout only
applies to
MOSFET
outputs)
0.14 
Function
Programmable
Brake/Programmable
XE2/XP2/XM2/800-1818/800-1819/800-1887
Channels
XE2/XP2/XM2/800-1818: 7 (OUT1~OUT7), 800-1819/800-1887: 5 (OUT1~OUT3,
OUT6~OUT7)
OUT1~OUT 5
OUT 6~OUT 7
Type
Opto-isolated MOSFET SSR with 1 series
resistor and 36V Zener flyback diodes across
outputs
Opto-isolated, current-sinking with flyback
diode to +24 Vdc
Maximum
Voltage
30Vdc
+32 Vdc
Maximum Sink
Current
300 mA
1 Adc
Low Level
Output
Resistance
Not applicable
0.14 
Function
Programmable
Note: 800-1819 and 800-1887 do not utilize
OUT4~5
Brake/Programmable