Copley Controls Xenus Plus Series - F.2: Accessory Model Numbers

Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 163
F.2: Accessory Model Numbers
Software
Model
Description
CME2
CME Drive Configuration Software (Download)
CML
Copley Motion Libraries (Download, license required)
CMO
Copley Motion Objects (Download)
CPL
Copley Programming Language (Download, license required)
Links to these software releases can be found at: http://www.copleycontrols.com/Motion/Downloads/index.html
Connector Kit with Solder-Cup Feedback and Control Connectors
XEL/XPL/XML
Model
Qty
Ref
Description
Mfr. Model No.
XEL-CK
XPL-CK
XML-CK
Connector
Kit
1
J1
Plug, 4 position, 7.5 mm, female
Wago: 721-204/026-045 (Note 1)
1
J2
Plug, 4 position, 5.0 mm, female
Wago: 721-104/026-047 (Note 1)
1
J3
Plug, 5 position, 5.0 mm, male
Wago: 721-605/000-044 (Note 1)
1
J4
Plug, 3 position, 5.0 mm, female
Wago: 721-103/026-047 (Note 1)
4
--
Tool, wire insertion and extraction
Wago: 231-131
1
J5
Connector, D-Sub, 9-position, male, solder cup
Norcomp: 171-009-103L001
1
Backshell, D-Sub, RoHS, metalized, for above
Norcomp: 979-009-020R121
1
J8
Connector, high-density D-Sub, 26 position, female, solder cup
Norcomp: 180-026-203L001
1
Backshell, D-Sub, RoHS, metalized, for above
Norcomp: 979-015-020R121
1
J9
Connector, high-density D-Sub, 15 position, male, solder cup
Norcomp: 180-015-103L001
1
Backshell, D-Sub, RoHS, metalized, for above
Norcomp: 979-009-020R121
1
J10
Connector, High Density D-Sub Male
26 position, solder-cup
Norcomp: 180-026-103L001
1
Backshell, D-Sub, RoHS, metalized, for above
Norcomp: 939-015-020R121
XE2/XP2/XM2/800-1818/800-1819/800-1887
Model
Qty
Ref
Name
Description
Mfr. Model No.
XE2-CK
Connector
Kit
1
J1
AC Pwr
Plug, 5 position, 5.08 mm, female
Wago: 231-305/107-000
1
J2
Regen
Plug, 3 position, 5.08 mm, female
Wago: 231-303/107-000
2
J3, J4
Motor
Plug, 4 position, 5.08 mm, female
Wago: 231-304/107-000
1
J5
Brake
Plug, 5 position, 3.5 mm, female
Wago: 734-105/107-000
1
J5
Tool
Tool, wire insertion & extraction, 734 series
Wago: 734-191
4
J1, J2
J3, J4
Tool
Tool, wire insertion & extraction, 231 series
Wago: 231-291
1
J6
Note 1
Safety
Connector, DE-9M, 9-position, standard, male
AMP/Tyco: 205204-4
9
AMPLIMITE HDP-20 Crimp-Snap Contacts, 24-20 AWG, Sel Au/Ni
AMP/Tyco: 66506-9
1
Backshell, DE-9, RoHS, metallized, for J6
Norcomp: 979-009-020R121
1
J12
Control
Connector, high-density DB-44M, 44 position, male, solder cup
Norcomp: 180-044-103L001
1
Backshell, DB-44, 44 Pin, RoHS, metallized
Norcomp: 979-025-020R121
2
J9
I/O
Connector, high-density DA-26F, 26 position, female, solder cup
Norcomp: 180-026-203L001
2
J10~11
Feed-
back
Connector, high-density DA-26M, 26 position, male, solder cup
Norcomp: 180-026-103L001
3
J9~11
Backshell, DA-26, RoHS, metallized
Norcomp: 979-015-020R121
SER-CK
1
J7
RS-232
Serial Cable Kit
XE2-NC-10
1
J8
Network
EtherCAT
®
network cable, 10 ft (3 m)
XE2-NC-01
1
EtherCAT
®
network cable, 1 ft (0.3 m)
Note 1: Insertion/extraction tool for J6 contacts is AMP/Tyco 91067-2 (not included in XP2-CK)